3DP-093-011H2D
3DP-093-011192.168.1.130Code: c5••••••
Drucker-02H2D
Drucker-02192.168.1.133Code: e1••••••
Drucker-03H2D
Drucker-03192.168.1.100Code: d1••••••
Drucker-04H2D
Drucker-04192.168.1.86Code: bd••••••
Drucker-05H2D
Drucker-05192.168.1.23Code: 39••••••
Drucker-06H2D
Drucker-06192.168.1.29Code: 4f••••••
Drucker-07H2D
Drucker-07192.168.1.59Code: c9••••••
Setup Instructions
- 1. Ensure all Bambu Lab printers are connected to the same LAN as this server.
- 2. On each printer, go to Settings → Network and note the IP address and Access Code.
- 3. The serial number is found on the printer label or in Settings → Device Info.
- 4. After adding a printer, the dashboard will attempt to connect via MQTT automatically. Status will update within 15–30 seconds.
- 5. If a printer shows OFFLINE, verify the IP address and access code, then save again to reconnect.